45W LED Grow Light, Light Plant Bulbs Plant Growing Bulb for
Hydroponic Aquatic Indoor Plants
- 225 LED's; 165 Red LED lights (650 nm wavelength) + 60 Blue LED
lights (465 nm wavelength). Note:the wavelengths for the lights
diodes may exist 10-30 nm errors.
- ABS plastic material molding, built into the plastic port, built-in
three drive power.
- Widely used in greenhouses, plant factory, greenhouse farming,
flower farming, indoor gardens, water soluble breeding, pipeline
cultivation, farm, potted plants, spray the plant, tissue culture
and so on.
- This product is suitable for bananas, flowers, Dendrobium orchids,
seaweed, green peppers, eggplant, bitter gourd, tomatoes, grapes,
lettuce, lettuce and other herbs, vegetables, flowers, plants and
plant tissue culture.
- And training for water or soil cultivation valid. Life of 50,000
hours, quality assurance two years
|LED wavelength||Red 660nm Blue 450nm|
|Red: Blue||3:1 4:1 5:1|
|Dimmable Mode||PWM Dimmer (0-100%) two way dimming|
|Material||Aluminum Alloy + PPMA cover|
Item: LED Grow Light
LED Quantity:165 Red LEDs+60 Blue LEDs
Red Light Wavelength:660nm
Blue Light Wavelength:460nm
Working environment temperature:-20~40 degree
Irradiation Area:1.5 square meter
Suggested Distance from the plant:12-18 in
Suggested ON/OFF Time: 16 hours/8 hours
60 ° concentrating cup kit silver surface temperature oil spray.
The back of the shell is made of 2.5mm thick pad of paper, the
outer surface temperature of black spray paint waterproof.
Can replace 3 to 5 times the power of high pressure sodium than
traditional high pressure sodium and metal halide lamps can save
80% of energy.
High light efficiency, 90% of light emitted can be absorbed by
plants. But the traditional high-pressure sodium lamps and metal
halide lamps, only 8-10% of the light effect.
With thick aluminum plate substrate compared to conventional glass
filler panels easy maintenance, better thermal conductivity, the
product of all the materials used ring to meet environmental
requirements, do not contain mercury, lead and heavy metals harmful
This product is not waterproof, do not watering, placed in the
water, otherwise it will cause leakage caused by damage to the
human body or lamps.
Ensure that the product when used in normal environments, lighting
work environment is -20 ~ 40 ℃, 45% ~ 95% RH.
Avoid in the heat, hot steam and corrosive gases, so as not to
affect life expectancy.
Ensure that the installation location before installation can
withstand 10 times the weight of the product.
Turn off the power when the thunder.
The Company prohibits non-professionals Product disassembly